Annotative Scaling in AutoCAD: Text, Dims and Hatches

A shop drawing sheet often shows the same object at three scales: a 1:50 plan, a 1:20 elevation and a 1:5 detail. Without a system, you end up with three copies of every note at three different heights. Annotative text in AutoCAD solves this by letting one object display at the correct printed size in every viewport. Once set up, it saves hours on each project.

The Core Idea

An annotative object has a paper height rather than a model height. If text is set to 2.5 mm paper height, it appears 125 mm tall in model space at 1:50 and 50 mm tall at 1:20. AutoCAD manages those sizes automatically, based on the annotation scale of each viewport.

Step 1: Create Annotative Styles

  1. Open the Text Style dialog with STYLE, create a style and tick Annotative. Set the paper text height, for example 2.5 mm.
  2. Open the Dimension Style Manager with DIMSTYLE, create or modify a style and tick Annotative on the Fit tab.
  3. Create an annotative multileader style for tags and callouts.
  4. For hatches, tick the Annotative option in the Hatch Creation options when needed.

Save all of these in your template so every drawing starts ready.

Step 2: Set the Annotation Scale

In model space, the annotation scale on the status bar decides the scale for new annotative objects. Set it to 1:50 before you annotate the plan. In a layout viewport, the viewport scale and annotation scale are normally synchronised, so the viewport shows only objects that support that scale.

Step 3: Add Scales to Objects

When the same note should appear in a 1:20 viewport as well, select it and use Add Current Scale or the OBJECTSCALE command to add 1:20. You can also turn on the status bar option that automatically adds scales to annotative objects when the annotation scale changes. Use that option carefully, because it can add scales to many objects at once.

Step 4: Adjust Positions per Scale

An annotative object can have a different position at each scale. Move a label in the 1:20 viewport and it will not move in the 1:50 view. This is useful when a detail is crowded. Use ANNORESET to bring all scale representations back to the original position if things get messy.

Controlling Visibility

Two status bar toggles matter:

  • Annotation Visibility: shows all annotative objects or only those that support the current scale. Turn it off in model space to reduce clutter.
  • Automatic scale add: adds the current scale to all annotative objects when you change scale. Leave it off unless you mean it.

When Annotative Is Not the Best Choice

  • Title block text and sheet notes belong in paper space, not model space.
  • Very simple drawings with a single scale may not need annotative objects at all.
  • Some older third-party tools and exports handle annotative objects poorly. Test before sending to collaborators who use other software.

Clean Up the Scale List

Drawings copied from many sources collect dozens of unused scales, including imperial ones. Use SCALELISTEDIT to delete unwanted scales and reset the list. A short list makes it easier to choose the right scale and keeps drawings light.

Practical Workflow for Shop Drawings

  1. Draw everything at 1:1 in model space.
  2. Annotate the general plan at 1:50.
  3. Create detail viewports at 1:20 and 1:5, then add those scales only to the notes and dimensions needed in each detail.
  4. Keep sheet notes, revision tables and stamps in paper space.
  5. Before plotting, check each viewport with Annotation Visibility off to confirm nothing is missing.

Troubleshooting

  • Text is invisible in a viewport: it does not support that viewport's scale. Add the scale to the object.
  • Text is huge in model space: Annotation Visibility is on and a large-scale representation is showing. Turn it off.
  • Dimensions look different in two viewports: one dimension style is annotative and the other is not. Standardise on annotative styles.

Annotative scaling feels strange for the first day, then it becomes a habit you will never want to drop.

A Five-Minute Practice Exercise

Draw a simple 3 m × 3 m room with a marble vanity. Add annotative dimensions and a note at 1:50. Create two layout viewports: the full room at 1:50 and the vanity at 1:10. Add the 1:10 scale only to the vanity dimensions and note, move the note in the detail viewport so it sits neatly, then plot both to PDF. Comparing the two views on one sheet shows exactly how annotative objects keep a consistent printed size.

Frequently Asked Questions

Does annotative text work in AutoCAD LT?

Yes. Annotative text, dimensions, multileaders and hatches work in AutoCAD LT as well as in full AutoCAD.

Can I convert existing text to annotative?

Yes. Select the text, set Annotative to Yes in the Properties palette and then add the scales you need.

Why do I see duplicated text after adding scales?

Each scale representation is shown when Annotation Visibility is on. Turn it off or use ANNORESET to realign the copies.

Related Reading on ShoaibSite

Written by Shoaib Hussan, Founder of D3DDD – Dubai 3D Design & Draft.

Instagram: @mxhaib

Need drawings or 3D? Visit d3ddd.com or email info@d3ddd.com.

Previous
Next Post »